Rustproof 3*7.5kw 35m3 Material Storage Bins

Model Is LXLC0135 Screw Diameter Is 400mm Raw Material Hopper

Raw Material Bins& Silo

The product line of bins includes raw material to meal bins and everything in between.

No matter what kind of meat, poultry or fish by-products you process, you will always need simple, rugged bins for moving, parking and storing everything from raw material and other inputs to your finished output.  

Taku Plan

    The Taku solution is mainly suitable for the cumulative weighing method. At this time, all materials are weighed on the same scale or a few scales, and then enter the mixer. This arrangement can be used when the venue is restricted. The advantages of the tower library layout are compactness, small footprint, low transportation costs, reduced operation and maintenance costs, easy dust control, low dust collection equipment costs, and convenient operation, which is beneficial to the selection of the mixer.

    However, the building height of the Taku factory building is relatively high, and the requirements for the endurance of the foundation are relatively high, the volume and quantity of the silo are limited, and the room for expansion is small. The height and area of ​​the factory building of the batching system should be compatible with the production process and batching volume.

    After the raw materials are put into the warehouse, the weighing and mixing process should be mechanized, and the height of the workshop should be able to meet the requirements of the corresponding process layout. Taking into account the requirements of batching method and batching quantity, the factory buildings should generally adopt the form of multi-storey buildings. Open side windows are set on the wall on the windward side. And there is a certain height from the ground, which is to prevent the dust settled on the ground and the equipment in the lower part of the room from being raised again when the cleaner fresh air is sent to the factory.

    The vertical layout of the batching workshop in a multi-storey building is generally to arrange the silo, screening, and dust collector on the upper layer, followed by the weighing and mixing parts, and the lower layer is generally a bucket elevator, belt conveyor, etc. In other words, there may be dusty air in each layer, so various separation measures to eliminate air channeling should be considered between layers